BlackBerry Z10 - Move Old Data from BlackBerry to BlackBerry Z10
The first thing to be done the old BlackBerry users are switching to Blackberry Z10 certainly move any data stored on the old device to the BlackBerry anyarnya. This can be done by using a switch device features are available by default. Curious? Let's follow the procedures below.
Here's how:
- Run your old BlackBerry device using the BlackBerry Torch 9850 for these tips)> select setup from the application list> then select Device Switch.
- Choose Using a Media Card. Click the Save Data.
- Mark (tick) select the Save emails if you want to save email from old device to appear back on your new BlackBerry. Click Continue.
- Create a password as needed and repeat the password to confirm the column, click Save.
- After the process of saving data to a memory card is complete, turn off your BlackBerry memory card soon move to Z10.
- Z10 Enable, and then select Setup from the list of apps (the app drawer).
- Select the Device Switch.
- Enter the password that has been defined previously in the fields, then click Transfer.
- Wait until the transfer is complete, the next screen will show what data is successfully transferred from the old BlackBerry device to the Z10.
Done! BlackBerry data long you've moved to a new BlackBerry. Good luck!
BlackBerry Dakota - Troubleshoot Camera in BlackBerry Dakota
If at any time you find a problem with the camera your BlackBerry Dakota, which deliberately shows "Could not start the camera. Close other applications and try opening the camera againa????, Then you can perform such remedial measures under Here you are.
some technical'll try to fix it by reprogramming the phone, to replace the camera module. But if it is not managed well it is necessary to take further measures.
1.
First of all, let's look first section schematic diagram below.
2.
Then click File, then open Download File Agent.
3.
Then there is a data processing IC that U1802 camera. Before being sent to the CPU, IC that has the greatest role in the processing of the data.
4.
Position U1802.
5.
How do I determine whether the poor IC processing this camera? Before determining whether the IC is normal, we should check the following points. First of all is the working voltage.
6.
Voltage is 2.8 volts to two
available second normal stress. Indeed, often times, in addition to the camera module itself is defective, the absence of one of these voltages are also often result in abnormalities of the camera of a mobile phone. After further exploration, this phone is damaged due to the presence of water splashes. So anything can happen, it rarely happens that any is likely to occur. Further examination of this takes quite a long time, and also requires a special tool called oscilloscope.
With this tool, we read whether or not the control signals in and out of an IC. So what we do can be justified, not just home to replace it. Although the price is relatively expensive, but its existence is to help us as a technician to analyze and repair a malfunction. Having examined closely, concluded that IC U1802 damaged. After replacing, the phone is back to normal again.
Tidak ada komentar:
Posting Komentar